How To Build A Wood Ramp For A Shed. Cut the 2x4 to be as long as the shed s lip is wide. Is this a ramp to walk up to the shed or a ramp to drive heavy.
Fill footings with at least six inches of coarse gravel. Pressure treated lumber rated for ground contact should be used to build a shed ramp. Smooth the edges after making the cuts and make sure you build all the joists in the same manner.
Fill footings with at least six inches of coarse gravel.
Line up and mark the holes from the shed onto the 2x4 with. Use the drill to bore holes into the lip of the shed about 1 below the door. Use a circular saw to cut. Plywood makes a good floor surface for a homemade ramp.